Positioning integral labels
By default, numerical integral labels are placed just below the end of each integral trace. The labels can be repositioned to avoid overlap.
Each label can independently be moved vertically a small amount. To do this, select the chosen integral by clicking the mouse button once to display a vertical red cursor, and placing that cursor on the chosen integral. There are 3 vertical positions available, which are set by typing the chosen number (1, 2 or 3).
The above figure illustrates the 3 positions, 1,2 and 3, from left to right. 1 is just above the end of the integral trace. 2 (default) is just below the integral trace. 3 is slightly lower still.
The labels can also be placed below the spectrum or at the top of the screen. The subcommand M toggles among the 2 positions (end of trace, top of screen, below spectrum).
Labels can also be displayed vertically, which can be useful in reducing overlap of labels. Integration subcommand V displays labels vertically, and subcommand H displays the labels horizontally. The default orientation can also be set in the nuts.ini file.
Last updated 12/10/02.